Equipped with a high-tech electronic system!
Power requirement tractor: Feed width: Feed height: Chopping output: | 130-220 PS 64 cm 60 cm upto 100 loose cubic metres/hour |
Top 3 features:
- Amply dimensioned feed
- Excellent wood chip quality
- Patented foreign matter protection device
The WT 8 XL Z confirms the advantage of MUS-MAX technology for the 200 HP tractor class.
A decisive advantage of this machine is the large rotor diameter and the amply dimensioned feed (w = 64 cm, h = 60 cm). The very large chopping knife advance and the very large screen surface of this chopping machine series confirm the advantage of Mus-Max technology in this performance class. The result: excellent wood chip quality, and on top: clean, square wood chips without fine particles. An amply dimensioned, thick-walled discharge screw and a blower – equipped with easily replaceable wear plates – confirm the maintenance friendliness and quality of this device. The just eight chopping knives can be replaced and sharpened fast. The state-of-the-art CANBUS electronic system and the load-dependent feed belt control confirm the success of this development. At the push of a button, you can switch from coarse to fine wood chips immediately. Furthermore the CANBUS electronic system has the advantage that a voltage of 12 or 24 volts can be used, and in addition, this board is vibration-proof and requires little space in the control box. In addition, a very thin, weather-proof cable with steel plaiting and a small, handy, ergonomic control panel are used.
Technical data WT 8 XL Z
Feed Opening (w x h) | 64cm x 60cm |
Tree Diameter max. | 60cm |
Chopping Output up to max. | 100 Cubic Metres/Hour |
Chopping knives or blades | 8 off |
Screen Surface | 1.15m² |
Ejection Height max. | 4.64m |
Throw Width max. approx. | 10m |
Machine Dimensions (l/w/h) | 5.6m/2.50m/3.21m |
Gross Weight from | 8.7-10.3t |
Feed Chain with Roller | 2.4m |
Power Requirement of Tractor | 130-220HP |
PTO Speed | 750 or 1000RPM |
Axles | 2 |
Attachment | Top or Bottom |
Cable Remote Control | Load-Controlled, Electronic Feed Belt Shut-Off with operating hours counter and daily hours counter for 10 operators |